Access and navigate the Flight Board

1. To access the flight board, click the Flight Board tab on

...

1. NuvolOps

2. See screenshot below to review the navigation controls

3. The date selector allows you to display up to 15 days. Choose your start and end dates to select.

4. The A/C Location button allows you to know where the Aircraft is, and if there is a mismatch between timeline events. Aircraft Location is calculated using the actual time and location whenever possible

5. Flight Stacks are generated and placed on the Flight Board Timeline when two or more flights overlap. The stack will show the flights contained and their stages. Click to expand the Flight Stack to review the flights separately

6. The Aircraft Filter allows you to select whether you want to see all aircraft, or only aircraft with activity in the selected time period

Expand
title Screenshot

Modify the settings

1. Click the Settings button

2. Click the General tab

3. Select the mode of the flight board - different information will be displayed on Charter and Ops mode

4. Select Trip Stages - only trips on these stages will be displayed on the Flight Board

5. Select Flight Leg Types - only flight legs of these types will be displayed on the Flight Board

6. To apply the changes, click Apply

Customize a template

1. Click on the Settings button

2. Click the Aircraft tab

3. Click on the '+' sign at the top to add a new template

4. Chose whether you want to display the aircraft by Operator or Dispatcher

5. Use the flight filters to customise the template

6. Click Save to save your Template

7. Click Apply to apply the changes

Expand
title Screenshots

Shared Templates are created by Luxaviation IT, contact @FlightWare Support on Chatter to request.

Refresh the Flight Board

1. Use the Refresh button to refresh the Flight Board manually

2. The Flight Board will auto-refresh every 5 minutes from the last refresh

3. Auto Refresh will NOT occur during any of the below actions:

   1. Editing a Dispatch to-Do

   2. Editing any field in Leg information before saving

   3. While on the Dispatch Checks pop-up

   4. While on the Permits pop-up

Request services grouping

...